While I would of agreed with you comment, why is it that I am able to put the rate limit commands on failover 6509 ?
-----Original Message----- From: Asbjorn Hojmark - Lists [mailto:li...@hojmark.org] Sent: Wednesday, February 10, 2010 3:08 PM To: Leslie Meade Cc: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] rate-limit command not accepting ? On Wed, 10 Feb 2010 11:00:55 -0800, you wrote: > DTCCAT-CORE01(config-if)# rate-limit input 2096000 128000 128000 > conform-action transmit exceed-action drop > ^ > % Invalid input detected at '^' marker. The rate-limit command is not supported on Catalyst 6500. Use a policy-map with policing instead. -A _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/