You might be using this command to avoid process switching:
ip igmp static-group x.x.x.x Jon -----Opprinnelig melding----- Fra: [email protected] [mailto:[email protected]] På vegne av luismi Sendt: 24. februar 2010 13:53 Til: Vladislav Vasilev Kopi: [email protected] Emne: Re: [c-nsp] ip igmp join-group x.x.x.x Be aware of the command, I dont know the behaviour of your platform, but in our 7206 npe-g2 we have issues with it. Multicast video and audio was broken because the command makes the multicast to be "process switched" , if my memory is ok. El lun, 22-02-2010 a las 22:40 +0000, Vladislav Vasilev escribió: > Hello all, > > I thought that applying "ip igmp join-group 239.1.1.1" makes the > interface under which is executed a member of 239.1.1.1 for as long as > the command is there. The problem is that the switch (in this case > ME3400) never sends another IGMP report and the multicast stream gets > pruned. I guess it is a bug? > > > Regards, > V.Vasilev > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
