What address scope are you using? Leah
-----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Tomas Lynch Sent: Thursday, March 04, 2010 11:40 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] BGP IPV6 strange message I'm trying to setup an IPv6 neighbor on a 7206VXR with NPE-G1 and c7200-spservicesk9-mz.122-33.SRD4.bin. All the needed IPv6 config is there (e.g. ipv6 cef) but BGP keeps telling me: 7200(config)#router bgp $ASN1 7200(config-router)#neigh X::X remote-as $ASN2 % Link local peer outside address-family scope 7200(config-router)#address-family ipv6 unicast % BGP: Error initializing topology I can ping to the neighbor X::X from X::(X+1). The routers are connected using gigabit ports. I have google the errors but there is nothing. Anybody else had this problem before? -tl _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/