Hi All, Not sure if I'm on the right track but I want to put pc-2 on the same ethernet segment (ip subnet) as pc-1. How do I accomplish this? Should I be looking at EoMPLs?
Network Topology: pc-1 -> switch-1 ->7606-1 <---> 7606-2 <-- switch-2 <-- pc-2 - All the "1' devices are geographically separated from all the "2" devices. - There is a /30 linking 7606-1 and 7606-2 core routers with each other. - MPLS is already running between the 7606's. - pc-1 is in vlan 12 with ip 172.16.70.x/24 - switch-1 and switch-2 are both WS-C3560G - switch-1 and switch-2 are in different mst regions. Is it a matter of creating a SVI with the xconnect config on the 7606's - but how do I then get the switches to particpate in EoMPLS so that the devices connected to the switch ports on switch-1 and switch-2 appear as if they are in the same ethernet segment??? Thanks. Andy _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/