Just be careful....I don't remember all the details but even with static
nat configurations we will create extended flow entries.
You can disable it with "no ip nat service create-flow" I think it is.
There were some performance reasons they are created but at the expense
of using more memory.
Rodney
On 4/2/10 10:06 AM, Derick Winkworth wrote:
You're right... I ran a script last night that configured 58000 static NATs. Of course,
"service compress-config" was necessary :-) but it took it with no problems...
________________________________
From: Rodney Dunn<[email protected]>
To: Derick Winkworth<[email protected]>
Cc: [email protected]
Sent: Fri, April 2, 2010 7:34:35 AM
Subject: Re: [c-nsp] maximum configurable static NATs on a 7200/NPE-G2...
Memory from what I recall.
Rodney
On 4/1/10 4:47 PM, Derick Winkworth wrote:
All:
Anyone know what the maximum number of configurable static NATs is on a
7200/NPE-G2? Is it just a function of memory or is there a hard limit
somewhere?
Derick
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
