On 2010-05-10 22:21, Kevin Loch wrote:
I migrated from a 2500w AC power supplies (running at 120v/1250w) to 2500w DC power supplies without any reboots or problems so you can mix and match AC/DC supplies of the same rating.
Right. No mysterious reboots should be observed when moving the power supplies, even if one is higher/lower wattage than the other. Just make sure the one that will be left in the chassis for a moment has enough power to hold all the system/LCs up and running which is pretty obvious. Take a look here BTW: http://cisco.com/en/US/products/hw/switches/ps700/products_tech_note09186a008015bfa8.shtml -- "Everything will be okay in the end. | Łukasz Bromirski If it's not okay, it's not the end." | http://lukasz.bromirski.net _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/