On Sat, May 15, 2010 at 11:30:51AM -0600, victor wrote: > > Maybe someone would know why when router receives DHCP offer on a vrf > interface the default route (option 3) gets installed in the main routing > table and NOT in the corresponding VRF? Here is a piece of config and show > ip route outputs: > [ . . . ] > Router#sho ver | in flash: > System image file is "flash:c181x-advipservicesk9-mz.124-6.T11.bin" > [ . . . ] > For now to avoid confusion I removed default router offer with "no ip dhcp > client request router" that means that I need to make sure that a correct > default route is installed manually. But it doesn't work very well because > the leased subnet changes periodically. So I'm looking for a way to make > cisco dhcp client vrf aware. Your suggestions are appreciated.
CSCsd20055, fixed in 12.4(11)T. -- Brett _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/