This an example of how I do it: conf t mls qos ! class-map match-all MyClass match ip dscp 0 policy-map MyPolicy class MyClass police 20000000 3750000 exceed-action drop ! interface FastEthernet0/17 service-policy input MyPolicy ! end
Hope this helps Ziv -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Stephane MAGAND Sent: Tuesday, June 01, 2010 2:24 PM To: cisco-nsp@puck.nether.net Subject: [c-nsp] Limit port usage on a cisco 3550 Hi I search to know if i can limit at 20 Mbits the usage of a Fe Port on a Cisco 3550 catalyst EMI ? The 3550 are used in Level 2, not Level 3. Thanks for your help Stephane _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ************************************************************************************ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. ************************************************************************************ ************************************************************************************ This footnote confirms that this email message has been scanned by PineApp Mail-SeCure for the presence of malicious code, vandals & computer viruses. ************************************************************************************ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/