Hi Arne, Please send IS-IS configurations, what adjacencies are up, and what your link state databases look like.
Thanks, Tony On Jun 24, 2010, at 1:10 PM, Arne Larsen / Region Nordjylland wrote: > > > Hi all. > > Can someone tell me what might be wrong. I have a router connected with 2 > neighbors ( R2 ). > > Setup.: - R0 - R1 - R2 - R3 > > The isis routing process on R2 don't see any L2-routes from R1, but R1 has > L2 routes. > R2 can se L2 routes from R3, and R1 an see L2 routes from R0. The three > routes R0, R2 & R3 has a domain passwd on the isis process, but R1 hasn't. > Can this miss configuration do this, I thought that the password protected > the process full. > > > /Arne > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
