SUP2 will not work as I do not believe the SIP modules needed for ATM interfaces are supported.
SUP32 should work as long as the SIP needed is supported(not 100% sure about SIP support on SUP32) but SUP32 can easily move this much traffic. SUP720/RSP720 will defiantly work. -Ben On Jun 25, 2010, at 10:50 AM, Rich Davies wrote: > Hello, > > Someone has asked me a question regarding what Cisco router platform can > handle an ATM OC-12. I did some digging and it seems the 7200 platform > (with NPE-G1/G2) is unable to handle this. If a 7600 (7603 actually) was > used what type of SUP/RP is needed to do ATM OC-12? (will SUP2/SUP32 work > or is RSP/SUP 720 needed)? > > > Thanks for any input. > > > -Rich > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/