Check whether you are not running into high CPU issues due to IRQ, due to wrong SDM profile used.See http://www.cisco.com/en/US/products/hw/switches/ps5023/products_tech_note09186a00801e7bb9.shtml
-pavel On Fri, Jun 25, 2010 at 5:52 PM, Brandon Ewing <nicot...@warningg.com>wrote: > Thanks to all the replies, on and off list. > > There is no QoS configured on the switch currently. mls qos isn't in the > config. Adding srr-queue bandwidth commands to the ports did not improve > the situation. > > The servers in question are not on the same vLAN, we're routing between > SVIs. I also tested with UDP, and got the same results as before. > > If anyone has any additional ideas as to what to check, it would be > appreciated. > > -- > Brandon Ewing ( > nicot...@warningg.com) > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
