On 30 June 2010 02:57, Harold Ritter <hrit...@cisco.com> wrote: > Hi Christian, > > Most recent IOS versions should support 6PE. The command "mpls ipv6 > source-interface" has been removed from most recent IOS versions as well. > This command only applied to locally originated traffic and the source > address selection is now as per RFC3484. >
And what IPv6 address should it be used by 6PE router when originating ICMPv6 packets in response to traceroutes coming from behind the MPLS network? On 7600 with SRB7[1] and SRD[2] it takes an IPv6 address that is configured on the first physical interface (ie. not SVI) visible in the configuration... Not like with MPLS/VPNs where the source address is taken from the egress interface towards VPN. Bug? Best Regards, -mat [1] Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRB7, RELEASE SOFTWARE (fc1) [2] Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVIPSERVICESK9-M), Version 12.2(33)SRD, RELEASE SOFTWARE (fc2) _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
