What version code on that 3560? There was a bug, but I don't remember the details....
Jim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Tor-Ivar Kristoffersen Sent: Tuesday, July 27, 2010 4:39 PM To: [email protected] Subject: [c-nsp] Cisco 1131AG on 3560-24PS - POE Problems Hi I have been seeing some very rare issue( rare to me ) I have a WLC 4402. We have many access points, 1200, 1131 and 1242s. One day one of the 1131s died. I took it back up and connected it to our cisco 4506. Here it's working just fine. So I thought it was a software upgrade issue(we had just upgraded the controller). So I just got it put back up, but no go. Boots up, apparently, but no link light on the 3560. It sees it as a "IEEE PD". It goes through some states, ends up in green, but after 1 minute it will go to white/redish and 1 minute later it will start flashing red/white I have tried everything ( I think), including other 3560 switches, new software on the switch. New cables, different ports. All the switches I have tried have 1142 accesspoints connected to them as well, can this be an issue ? The 4506 has of course many other access points, from all our hw series( 1131, 1200 and 1242) and that has no issues. Any clues here ? Output from the 3560 ( did some cutting) CAT.A1.3560#sh pow inl Available:370.0(w) Used:86.5(w) Remaining:283.5(w) Interface Admin Oper Power Device Class Max (Watts) --------- ------ ---------- ------- ------------------- ----- ---- Fa0/10 auto on 12.9 IP Phone 7941 3 15.4 Fa0/11 auto on 6.3 IP Phone 7940 n/a 15.4 Fa0/12 auto off 0.0 n/a n/a 15.4 Fa0/13 auto off 0.0 n/a n/a 15.4 Fa0/14 auto on 6.3 IP Phone 7941 2 15.4 Fa0/15 auto off 0.0 n/a n/a 15.4 Fa0/16 auto on 6.3 IP Phone 7941 2 15.4 Fa0/17 auto off 0.0 n/a n/a 15.4 Fa0/18 auto off 0.0 n/a n/a 15.4 Fa0/19 auto off 0.0 n/a n/a 15.4 Fa0/20 auto off 0.0 n/a n/a 15.4 Fa0/21 auto on 15.4 AIR-LAP1142N-E-K9 3 15.4 Fa0/24 auto on 15.4 Ieee PD 3 15.4 The 1131 is connected to port 24. The 1131s was connected to this switch before, we have upgraded to v7 now on the controller ( from 6, was the same issue) also we introduced the 1142s some time back, and I am beginning to wonder if this can be the case. Anyone running poe to 1131 and 1142 on 3560ps-s ? Mvh Tor-Ivar Kristoffersen IT Konsulent Lufttransport AS _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
