> Does PBR supports match community in route-map? If yes which IOS release?
Matching a community through PBR can be achieved through QPPB. You would have to use a table-map under BGP to assign an IP Prec value in CEF. route-map TABLE-MAP permit 10 match community QPPB-COMMUNITY set ip precedence priority ! route-map TABLE-MAP permit 20 set ip precedence routine ! You would then use PBR to match the IP Prec value: ip access-list extended IPP-1 permit ip any any precedence priority ! route-map PBR permit 10 match ip address IPP-1 set ip next-hop x.x.x.x ! You would need to apply "bgp-policy destination ip-prec-map" to allow CEF to mark your traffic based on the IP Prec values in CEF. You haven't mentioned what platform you are wanting to do this on? Hope that helps, Chris _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
