Actually changing domain name will reset config revision, so the step with transparent isn't necessary.
On Thu, Aug 5, 2010 at 9:57 AM, Holger <[email protected]> wrote: > On 04.08.10 17:09, Troy Beisigl wrote: >> After reading up on VTP server configurations at Cisco, I wanted to >> get someone's real life experience sign off on this. >> >> Cisco docs state that you can have more than one VTP server in a VTP >> domain and that updates on one will update the other and vise versa. >> My concern is that I have two switches that are in different domains >> and going to migrate one of them onto the same domain as the other. >> How will this affect the VLAN information? >> >> If I have both configured >> with the exact same VLANs and VLAN names, will this prevent a total >> loss of VLAN data in one or both of these switches? > > The switch with higher config revision will overwrite the config > of the other. > > Manually add vlans of one switch to the config of the second switch. > Change the mode of the first switch to transparent and then back to server. > This will set revision to zero and thus copy the config from the second > switch to the first one. > >> >> Any advise would be greatly appreciated. >> >> Thanks, >> >> - Troy > > - Holger > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
