I have an issue with EIGRP summary-address. This is on a 6506E sup32 running 12.2 SXF16. The cat65 has a trunk to a 7304 NSE100 and I am running EIGRP between them on an SVI which is part of the trunk. I am trying to remove some summaries but nothing seems to work. I haven't tried removing the vlan config or reloading the box yet.
Any ideas? cat65-1# cat65-1#conf t Enter configuration commands, one per line. End with CNTL/Z. cat65-1(config)#! cat65-1(config)#interface Vlan101 cat65-1(config-if)#! cat65-1(config-if)#! remove summaries cat65-1(config-if)# no ip summary-address eigrp 2130 172.31.144.0 255.255.254.0 5 cat65-1(config-if)# no ip summary-address eigrp 2130 172.30.0.0 255.255.224.0 5 cat65-1(config-if)# no ip summary-address eigrp 2130 172.18.224.0 255.255.224.0 5 cat65-1(config-if)# no ip summary-address eigrp 2130 10.142.0.0 255.255.0.0 5 cat65-1(config-if)# no ip summary-address eigrp 2130 10.140.0.0 255.255.0.0 5 cat65-1(config-if)# no ip summary-address eigrp 2130 10.130.0.0 255.255.0.0 5 cat65-1(config-if)# no ip summary-address eigrp 2130 10.128.0.0 255.255.0.0 5 cat65-1(config-if)#! cat65-1(config-if)#do sh run int vlan101 Building configuration... Current configuration : 1154 bytes ! interface Vlan101 bandwidth 1000000 ip vrf forwarding foo ip address 172.31.144.41 255.255.255.248 ip summary-address eigrp 2130 172.31.144.0 255.255.254.0 5 ip summary-address eigrp 2130 172.30.0.0 255.255.224.0 5 ip summary-address eigrp 2130 172.18.224.0 255.255.224.0 5 ip summary-address eigrp 2130 10.142.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.140.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.130.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.128.0.0 255.255.0.0 5 end cat65-1(config-if)# no ip summary-address eigrp 2130 172.31.144.0 255.255.254.0 5 cat65-1(config-if)# no ip summary-address eigrp 2130 172.30.0.0 255.255.224.0 5 cat65-1(config-if)# no ip summary-address eigrp 2130 172.18.224.0 255.255.224.0 5 cat65-1(config-if)# cat65-1(config-if)#do sh run int vlan101 Building configuration... Current configuration : 1154 bytes ! interface Vlan101 bandwidth 1000000 ip vrf forwarding foo ip address 172.31.144.41 255.255.255.248 ip summary-address eigrp 2130 172.31.144.0 255.255.254.0 5 ip summary-address eigrp 2130 172.30.0.0 255.255.224.0 5 ip summary-address eigrp 2130 172.18.224.0 255.255.224.0 5 ip summary-address eigrp 2130 10.142.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.140.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.130.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.128.0.0 255.255.0.0 5 end cat65-1(config-if)#no ip summary-address eigrp 2130 172.31.144.0 255.255.254.0 5 cat65-1(config-if)#do sh run int vlan101 Building configuration... Current configuration : 1154 bytes ! interface Vlan101 bandwidth 1000000 ip vrf forwarding foo ip address 172.31.144.41 255.255.255.248 ip summary-address eigrp 2130 172.31.144.0 255.255.254.0 5 ip summary-address eigrp 2130 172.30.0.0 255.255.224.0 5 ip summary-address eigrp 2130 172.18.224.0 255.255.224.0 5 ip summary-address eigrp 2130 10.142.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.140.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.130.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.128.0.0 255.255.0.0 5 end cat65-1(config-if)# cat65-1#conf t Enter configuration commands, one per line. End with CNTL/Z. cat65-1(config)#int vlan101 cat65-1(config-if)#shut cat65-1(config-if)# cat65-1(config-if)#end cat65-1# cat65-1#sh int vlan101 Vlan101 is administratively down, line protocol is down cat65-1# cat65-1# cat65-1#conf t Enter configuration commands, one per line. End with CNTL/Z. cat65-1(config)#int vlan101 cat65-1(config-if)#no ip summary-address eigrp 2130 172.31.144.0 255.255.254.0 cat65-1(config-if)#end cat65-1# Building configuration... Current configuration : 1620 bytes ! interface Vlan101 bandwidth 1000000 ip vrf forwarding foo ip address 172.31.144.41 255.255.255.248 ip summary-address eigrp 2130 172.31.144.0 255.255.254.0 5 ip summary-address eigrp 2130 172.30.0.0 255.255.224.0 5 ip summary-address eigrp 2130 172.18.224.0 255.255.224.0 5 ip summary-address eigrp 2130 10.142.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.140.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.130.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.128.0.0 255.255.0.0 5 ip summary-address eigrp 2130 172.30.0.0 255.255.224.0 5 ip summary-address eigrp 2130 172.18.224.0 255.255.224.0 5 ip summary-address eigrp 2130 130.144.0.0 255.255.0.0 5 ip summary-address eigrp 2130 130.139.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.142.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.140.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.130.0.0 255.255.0.0 5 ip summary-address eigrp 2130 10.128.0.0 255.255.0.0 5 shutdown end cat65-1#conf t Enter configuration commands, one per line. End with CNTL/Z. cat65-1(config)#int vlan101 cat65-1(config-if)#no shut Aug 14 17:03:52.998 CET: %DUAL-5-NBRCHANGE: IP-EIGRP(1) 2130: Neighbor 172.31.144.46 (Vlan101) is up: new adjacency cat65-1(config-if) Nasir Shaikh _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
