Hi Gary,
By bad, you are correct it is in 802.3.
Thanks,
Jim
-----Original Message-----
From: Gary Buhrmaster [mailto:[email protected]]
Sent: Saturday, August 21, 2010 1:08 PM
To: Jim Getker (getker)
Cc: [email protected]; [email protected];
[email protected]
Subject: Re: [c-nsp] full duplex mismatch speed - dynamips
Importance: High
On Sat, Aug 21, 2010 at 09:42, Jim Getker (getker) <[email protected]>
wrote:
> There is no such thing as gigabit half duplex
Actually, the IEEE specifications allows for 1000/half
(to support gigabit hubs). That I have never seen a
gigabit hub is not relevant to the capabilities one must
build into the device to be standards compliant.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
