Hi group,
Below is a weird problem when I set an interface on ES20 linecard to its default setting Router(config)#default int g3/0/1 Command rejected: not allowed on this interface. Command rejected: not allowed on this interface. Command rejected: not allowed on this interface. % Error(s) seen setting interface GigabitEthernet3/0/1 to it's default config The router is 7609 and use 12.2(33)SRD. The command can be applied normally on other interface on the same card. Anyone has any idea? Thanks, Rin _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/