On 13/09/2010 07:05, Gert Doering wrote:
ports, while the average egress load never exceeded 50% (!)
The average that you're talking about here is measured over 5 minutes, which is an eternity in terms of packet throughput. If you drop your measurement interval from 5 minutes to something much lower (5 - 30 seconds, you'll get a much more accurate picture of what your switch is actually doing.
Nick _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
