I'm doing it on WS-X6704-10GE cards without issue. My largest segment is 26 nodes and it is fast and reliable.
AFAIK.... You should be able to run REP on any switching interface with an IOS that supports REP. Brian J. >-----Original Message----- >From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp- >boun...@puck.nether.net] On Behalf Of Danijel >Sent: Monday, September 06, 2010 3:36 AM >To: cisco-nsp@puck.nether.net >Subject: [c-nsp] REP support on 7600 > >Hi, > >Anyone know if REP is only supported on ES line cards or is is possible to >use something like WS-X6724-SFP and configure REP rings from it? > >Also, anyone using REP in a larger rings? > >We are are currently planning a small metro network with me3400 switches >and >are looking for a aggregation point for the rings. 7600 looks nice but those >ES cards are pretty expensive. > >thnx, >Danijel > >-- >*blap* >_______________________________________________ >cisco-nsp mailing list cisco-nsp@puck.nether.net >https://puck.nether.net/mailman/listinfo/cisco-nsp >archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/