Has anyone seen this informational message on an ASR1002 (running IOS XE 3.1S):
ASR1-A(config)# interface Port-Channel 6.415 ASR1-A(config-subif)# encapsulation dot1Q 415 ASR1-A(config-subif)# ip address 10.96.24.2 255.255.254.0 ASR1-A(config-subif)# ip access-group CUST-IN in ASR1-A(config-subif)# ip nat inside ASR1-A(config-subif)# ip virtual-reassembly ASR1-A(config-subif)# standby 1 ip 10.96.24.1 % Warning: Interface MAC address filter only supports 28 additional addresses % and 28 HSRP groups are already configured. The HSRP MAC address may not be % added to the MAC address filter if the group becomes active. We are using Standby groups 1 and 2 on each customer sub-interface on the Port-Channel, which provide FHRP between a pair of ASRs. Is this a likely to be an issue as more sub-interfaces are added? Cheers, Matt -- Matthew Melbourne _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
