Oliver : Thanks for your help , it's already save us many many times for migration task
Cheers mate Raymond On Tue, Oct 12, 2010 at 5:21 PM, Oliver Boehmer (oboehmer) <[email protected]> wrote: > >> What will you do when using IOSXR to show you all information >> associated with the interface ? It's very complicated when you are >> doing migration task on IOSXR > > you can try "show run formal | include <interface>": > > RP/0/RP0/CPU0:<node>#show run formal | include TenGigE0/2/0/0 > interface TenGigE0/2/0/0 description ... > interface TenGigE0/2/0/0 cdp > interface TenGigE0/2/0/0 mtu 9014 > interface TenGigE0/2/0/0 service-policy output egress-qos > interface TenGigE0/2/0/0 ipv4 address ... > interface TenGigE0/2/0/0 carrier-delay up 1000 down 100 > interface TenGigE0/2/0/0 dampening > router ospf 1002 area 0 interface TenGigE0/2/0/0 > router ospf 1002 area 0 interface TenGigE0/2/0/0 bfd minimum-interval 50 > router ospf 1002 area 0 interface TenGigE0/2/0/0 bfd fast-detect > router ospf 1002 area 0 interface TenGigE0/2/0/0 bfd multiplier 3 > router ospf 1002 area 0 interface TenGigE0/2/0/0 message-digest-key 1 > md5 ... > router ospf 1002 area 0 interface TenGigE0/2/0/0 network point-to-point > mpls ldp interface TenGigE0/2/0/0 > > hope it helps > > oli > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
