Hi , vrf-table-label is not supported on channelised STM-1 on juniper. This is the reaqson why cisco is best.
http://www.juniper.net/techpubs/software/junos/junos90/swconfig-vpns/other-limitations.html#id-10993840 On Thu, Oct 14, 2010 at 10:29 AM, <[email protected]> wrote: >> I'm facing a issue where I have configured 3E1's on channelised STM-1 >> card of juniper between M320 (P router ) and M120 (PE router ) >> >> Is there any limitations that we can't use Channelised Stm-1 and >> configure E1 on MPLS core links ( P-P or PE-P) > > Should work just fine. The capacity will, of course, be limited. > > Steinar Haug, Nethelp consulting, [email protected] > _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
