Hi, On Sun, Oct 24, 2010 at 02:03:42PM -0500, Christopher J. Wargaski wrote: > IMHO, run BGP (iBGP + eBGP) end to end and life will be much simpler.
Just running BGP with no IGP sounds... painful.
Full mesh doesn't scale, and route reflectors just don't work if you have
no routes to the loopbacks...
For a network with just 2 or 3 routers, yes, "just iBGP" will work fine,
but this thread was about a network with 100 routers.
gert
--
USENET is *not* the non-clickable part of WWW!
//www.muc.de/~gert/
Gert Doering - Munich, Germany [email protected]
fax: +49-89-35655025 [email protected]
pgp8oBSKFKlna.pgp
Description: PGP signature
_______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
