I have a couple of Supervisor Engine 2 that I need to upgrade memory in order to run the latest IOS and to set them up as redundant SUPs on a 6513.
I run in to the following symptoms on both Sups so I figure there must be something I'm missing. Both SUP are part number WS-X6K-SUP2-2GE new SP memory is part# MEM-S2-256MB new MSFC2 part# is MEM-MSFC2-512MB When I try to upgrade the SP memory the SUP will not boot at all, nothing will display on the console. When I upgrade the MSFC2 memory alone ( I leave the existing memory on the SP) then the IOS load will crash. Here is the extract... Cisco Internetwork Operating System Software IOS (tm) c6sup2_sp Software (c6sup2_sp-SP-M), Version 12.1(27b)E4, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2008 by cisco Systems, Inc. Compiled Fri 29-Feb-08 13:22 by hqluong Image text-base: 0x40020EF4, data-base: 0x40954000 00:00:03: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor 00:00:08: %OIR-SP-6-CONSOLE: Changing console ownership to route processor 00:03:08: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output. 00:03:09: %OIR-SP-6-CONSOLE: Changing console ownership to switch processor *** System received a Software forced crash *** signal= 0x17, code= 0x42380000, context= 0x423b7f34 PC = 0x401236c4, Cause = 0x1820, Status Reg = 0x34018002 Is there a firmware upgrade for the SUP and MSFC2 I may be missing? Here is the detail on the harware on one of the 6500 I'm using to test this. Mod Port Model Serial # Versions --- ---- ------------------ ----------- -------------------------------------- 1 2 WS-X6K-SUP2-2GE SAL06282EJP Hw : 3.7 Fw : 7.1(1) Sw : 12.1(27b)E4 Fw1: 6.1(3) Sw1: 8.5(0.23)COS6 WS-F6K-MSFC2 SAL0542D5AQ Hw : 1.2 Fw : 12.1(4r)E Sw : 12.1(27b)E4 WS-F6K-PFC2 SAL06272BVY Hw : 3.2 3 48 WS-X6148-RJ45V SAL0720D4LB Hw : 1.3 Fw : 5.4(2) Sw : 8.5(0.23)COS6 4 48 WS-X6148-RJ45V SAL062726SD Hw : 1.6 Fw : 5.4(2) Sw : 8.5(0.23)COS6 5 48 WS-X6148-RJ45V SAL06282HC8 Hw : 1.0 Fw : 5.4(2) Sw : 8.5(0.23)COS6 6 48 WS-X6348-RJ-45 SAL0545E384 Hw : 5.0 Fw : 5.4(2) Sw : 8.5(0.23)COS Any help will be greatlly appreciated. Thanks! _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
