On 26/10/10 15:22, Pavel Dimow wrote:
Hi Phil,
my understanding is that when not using PIM (because this is a single
switch and beside that have SMI software without PIM support) the
switch will become querier. Which is fine, but as soon as it hears PIM
hello message
on any interface it will "designate" that interface as the one where
is connected multicast router and will immediately
forward all streams to that port, which in my case is not desired
action. I tried to filter all pim messages with ACL but
I think thats irrelevant as IGMP snooping comes into the play well before ACL.
Am I right? :)
I believe so; this was discussed on the list recently.
Short of enabling PIM-snooping (if your platform supports it) you don't
have many options I'm afraid.
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
