On Sun, Oct 31, 2010 at 6:49 PM, [email protected] <[email protected]> wrote: >>On Sun, Oct 31, 2010 at 6:18 PM, <[email protected]> wrote: >>> "speed 1000" on a copper port capable of 10/100/1000 disables 10 and 100 >>> Mb/s operation by removing those modes from the list of those advertised to >>> the link partner. >>> >>> This may be useful if you would prefer a cable failure on pins 4, 5, 7 or >>> 8 to drop the link and keep it down, rather than renegotiating it at 100 >>> Mb/s. >>> >>> N-way still runs. >>> >>> /chris > >> That's what I thought. So, if a link is already successfully >> negotiating at 1000/Full with no errors, there really is no point in >> hard setting it to 1000/Full, in my opinion. > > Does this mean that "speed 1000" is therefore equivalent to "speed auto 1000"? >
That's what it looks like to me, but that's what I wanted to verify. It seems to me that if you're already connected at 1000/Full (auto), it literally does nothing behavior-wise if you manually configure 1000/Full, since N-way is still operating. _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
