On 01/11/10 13:19, Robert Hass wrote:
On Mon, Nov 1, 2010 at 12:59 PM, Phil Mayers<[email protected]> wrote:
3) Automatic BGP refresh
When I change something in route-map for inbound BGP prefixes I
noticed that Cat6500 automatically refresh inbound BGP router
(automatically doing something like clear ip bgp x.x.x.x in). Is is
new feature in SXI4a ?
Really? Are you sure?
Yes. I checked this again few minutes ago on two 6500s in LAB. First
one is running 12.2(33)SXH4 and second one is running 12.2(33)SXI4a. I
simply modified inbound route-map (applied on neighbor) - changed
local-preference on both switches. And switch running SXI4a
automatically refreshed (without clear ip bgp ... in) inbound routes
and applied changes done within route-map.
That seems like a bit of a dangerous "feature" to introduce with no
warning, if that's what's really happening; what if you have a complex
multi-edit sequence to go through when rebuilding a route-map?
I'm not seeing the behaviour - a quick test on an eBGP peer locally
doesn't do this on our SXI4a box. Can you show some BGP config?
_______________________________________________
cisco-nsp mailing list [email protected]
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/
