SPAN is too CPU based. As per one of the members proposed, use netflow that's the best way to achieve. if you do have a heavy load, set a high sampling rate.
--raymondh On 03-Dec-2010, at 12:17 AM, Joe Loiacono wrote: > cisco-nsp-boun...@puck.nether.net wrote on 12/01/2010 09:51:44 PM: > >> How I am able to see traffic (source IP, destination IP and port) which > is >> passing from Cisco routers, from specific interface or as a whole. >> >> Which is easiest and troubleless way to achieve this. Kindly also guide > me >> with full set of commands to achieve this. > > Try IP Accounting: > > http://www.ciscopress.com/articles/article.asp?p=764234 > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/