On 12/02/2010 10:38 PM, Jason Lixfeld wrote:
my side. Changing the internal allocation policy from ascending to
descending following by a reboot will, I'm hoping, cause the box to
come back up and allocate a VLAN to F5/13 from the high end of the
range instead of the low end of the range but I have no way to test
this.
Yes, it works as expected:
sm-core#sh start | inc allocation
vlan internal allocation policy descending
sm-core#sh vlan internal usage
VLAN Usage
---- --------------------
...
4091 online diag vlan3
4092 online diag vlan2
4093 online diag vlan1
4094 online diag vlan0
Inability to be a bit more specific than "ascending" (from 1000) and
"descending" (from 4094) is an irritation with these boxes; it would be
more helpful and I'm sure not that hard to allow specification of a range:
vlan internal allocation range 3000-3199,3350-3399
...and would allow sites to tune to their local allocation policies easier.
_______________________________________________
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/