Answering my own questions. The ACE has an 1 GB CF. This CF has two Linux partitions:
Disk /dev/sdb: 1024 MB, 1024966656 bytes 16 heads, 63 sectors/track, 1986 cylinders Units = cylinders of 1008 * 512 = 516096 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 1 249 125464+ 83 Linux /dev/sdb2 250 1986 875448 83 Linux In the first partition there are these files: -rw-rw-rw- 1 root root 71997932 2008-01-24 10:19 ACE_APPLIANCE_RECOVERY_IMAGE.bin drwxr-xr-x 2 root root 1024 2007-04-12 16:06 grub -rw-rw-rw- 1 root root 7 2010-12-03 06:50 reload_reason And in the second these files: -rw-rw-rw- 1 root root 196847566 2010-04-12 10:05 c4710ace-mz.A3_2_5.bin -rw-r--r-- 1 root root 32505856 2007-04-12 16:23 TN-CERTKEY-STORAGE -rw-r--r-- 1 root root 74448896 2007-04-12 16:22 TN-CONFIG -rw-r--r-- 1 root root 209715200 2007-04-12 16:23 TN-COREFILE -rw-r--r-- 1 root root 11534336 2007-04-12 16:23 TN-HOME -rw-r--r-- 1 root root 11534336 2007-04-12 16:23 TN-LOGFILE This partition includes 5 compressed file systems: TN-CERTKEY-STORAGE, TN-CONFIG, TN-COREFILE, TN-HOME, TN-LOGFILE You can mount them with "mount -o loop compressed_filename mount_point" Regards, Antonio Soares, CCIE #18473 (R&S/SP) amsoa...@netcabo.pt -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Antonio Soares Sent: quarta-feira, 17 de Novembro de 2010 18:43 To: cisco-nsp@puck.nether.net Subject: Re: [c-nsp] ACE File System Group, I searched a lot and didn't find this "debug plug-in" module anywhere. But I found this reference: switch/Admin# load image:waszi-vs-ace.tar.gz ############################################################### Warning: debug-plugin is for engineering internal use only! For security reason, plugin image has been deleted. ############################################################### So it exists, the question is where ??? It's just for my lab :) Regards, Antonio Soares, CCIE #18473 (R&S/SP) amsoa...@netcabo.pt -----Original Message----- From: cisco-nsp-boun...@puck.nether.net [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Antonio Soares Sent: terça-feira, 16 de Novembro de 2010 17:10 To: cisco-nsp@puck.nether.net Subject: [c-nsp] ACE File System Hello group, I'm curious about the ACE file system and I found this on the Cisco Live presentation BRKAPP-3003: "Load debug plug-in to access ACE file system" Is this plug-in available somewhere ? What's the procedure in order to load it ? I see there's one "load" command available: load Load plug-in image I always found the ACE file system really obscure but it seems there's a tool to help us. Thanks. Regards, Antonio Soares, CCIE #18473 (R&S/SP) amsoa...@netcabo.pt _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/