I still recommend at least checking out the BGP appliances. You'll never get any where near even distribution without some kind of active processing. However, if you are dead set on manual configuration do you have any idea what your traffic spread is? For example if your customers are predominantly in one AS or IP block, or if you are a hosting company you can choose some of the larger ISP's and nail their traffic to one link or another. Implementing netflow will help with this as well. Unfortunately in there isn't a single easy configuration that makes this work as different business have different traffic patterns and different needs.
On Mon, Dec 20, 2010 at 4:30 PM, RAZ MUHAMMAD <raz.muham...@gmail.com>wrote: > Hi all, > > I would like to find out how one can use BGP to load balance outbound > traffic, while multi homed to 2 transit providers or ISPs and getting full > routing tables, no default routes? The BGP peer at the client end is a non > Cisco router, so would not be able to use the multipath feature. The load > balancing is intended for all routes in the routing table, or at least to > achieve some kind of load distribution. > > Is there any other way to achieve an optimal outbound load balancing method > using eBGP? > > Regards > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/