On Mon, Jan 31, 2011 at 11:35, Nick Voth <nv...@estreet.com> wrote: > I think that's what I'll probably have to do because it doesn't look like > there's a good all-in-one solution. > > Thanks, > > -Nick Voth >
If you want to preserve your existing MC-T3 investment, you could install a 15454 shelf to use as a 3/1 DACS (depending on how many T1s you're handling an old one would be fine, using TCC+ controllers, XC-VTs, and DS3-XM6 cards to do DS3 transmux). Plug the circuits from the telcos into the XM6 cards, plug your routers into the XM6 cards. Build circuits between the two in the 15454. Hang a mux off another XM6 port and connect individual DS1s from that mux over to your IMA card(s). Or just get lots of muxes (1 for each carrier DS3 and MC-T3 port) and DSX1 panels, but doing it in a 15454 is a lot more convenient. ~Matt _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/