Hi, On 3 February 2011 05:45, Rens <[email protected]> wrote: > Hi, > I have 2 subinterfaces (Fa0/1.100 & Fa0/1.200) > Here are the things I would like: > 1) rate limit both to 8 Mbps > 2) never use over 8 Mbps together > 3) the first subinterface should always have 4 Mbps needed > Is this possible?
Depending on your hardware/software you might be able to create a parent policy attached to the physical interface (Fa0/1) that classifies traffic based on vlan id (match vlan). Another option to try (only in inbound direction) is to match on interface (match input-interface). You might also try attaching one policy to the physical interface and another to the subinterfaces. kind regards Pshem _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
