On Friday, January 28, 2011 02:18:51 pm Jim Berwick wrote: > Looking for a switch that can do ingress and egress rate > shaping (or thinking of a 3750 stack and handling rate > shaping on the router upstream), and a router/switch > that can handle full BGP tables from at least two > providers. We need something either fully redundant > (dual SUP, power supply, etc), or two units with HSRP.
I don't know that many switches that support egress policing, but the ME3600X/3800X does (although it's not currently enabled in the software). Egress shaping is available, however, but shaping could be more expensive than policing especially for non-critical traffic. That said, policing at the router is also a good idea, just that scaling this requires silicon and not software in the long run. Cheers, Mark.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
