On Tue, 2011-02-08 at 10:01 -0600, Jason Cardenas wrote: > #show platform hardware capacity ... > Interface Resources > Interface drops: > Module Total drops: Tx Rx Highest drop port: Tx > Rx > 3 3020928236 0 12 0
That might be a problem. What does "show interface" counters tell you about "output drops", at least for Gi3/12 but probably also other interfaces? Are the 3,020,928,236 drops a significant amount compared to "packets output"? Try "show queueing interface Gi3/X" for every X with a significant amount of "output drops". It does not in itself explain why the drops are selective of course. Unless you have some complex-ish QoS-marking somewhere. > Pete Lumbus, we're looking into that direction; but we simply don't > have anything like "QoS, tcp adjust-mss" on our interfaces But you have QoS enabled globally. With no interface specific configuration you might have worse results than with no QoS at all. -- Peter _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
