According to the Feature Navigator (which we know is not always accurate), IPv6 is supported in IPBASE only on 7200 and 7300 routers and Catalyst 3560/3750, CBS3k blade switches and 6500 Sup32 switches.
On 2811 routers with 12.4T, IPv6 is available in IP Voice, SP Services, Advanced IP Services, Enterprise Services and Advanced Enterprise Services. Andras On Fri, Feb 25, 2011 at 5:57 PM, Jeff Wojciechowski <jeff.wojciechow...@midlandpaper.com> wrote: > Pitor- > > Please forgive my ignorance: > > I am attempting to get familiar with this myself on a 2811 running 12.4(24)T4 > - but that's IP Base. > > I don't even have the option to assign an IPv6 address to an interface. > > Do you happen to know which flavor image I need? > > Regards, > > -Jeff Wojciechowski > > > -----Original Message----- > From: cisco-nsp-boun...@puck.nether.net > [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Piotr Wojciechowski > Sent: Friday, February 25, 2011 9:00 AM > To: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] Searching for cheap IPv6 NAT-PT Cisco-device > > On 2/25/11 2:17 PM, Andreas Mueller wrote: >> >> Hello, >> >> I would like to connect IPv4-only devices like printers to an >> IPv6-only Network and I thought about doing this with NAT-PT on a >> cisco-device. To play around with NAT-PT and do some tests I need a cheap >> device. >> According to the cisco document "Implementing NAT-PT for IPv6" >> (http://www.cisco.com/en/US/docs/ios/ipv6/configuration/guide/ip6-nat_ >> trnsln_ps6350_TSD_Products_Configuration_Guide_Chapter.html) >> >> I need IOS 12.4(2)T if I want to use all the available features. What >> is the cheapest cisco-device with at least two or better four fast >> ethernet ports running IOS 12.4(2)T to evaluate, if configuring NAT-PT >> is a solution for my problem ? >> >> greetings and thanks for help, >> > > Hello Andreas, > > In general performance of NAT64 is not really high. I remember on Cisco > 2801 ~4Mbit was all I could get. I used one of the latest 12.4T release, > 12.4(24)T as far as I remember. The smaller reasonable device to play with > would be Cisco 1841 but it's also available on 870 and 880 platform. Of > course for the production network I'd check how much traffic it's going to > handle (and not only in number of TCP sessions that have to be translated but > throughput itself, because NAT64 is process switched since 12.4(20)T, until > that it was fast switched). > > Regards, > -- > Piotr Wojciechowski (CCIE #25543) | "The trouble with being a god is > http://ccieplayground.wordpress.com | that you've got no one to pray to" > JID: pe...@jabber.org | -- (Terry Pratchett, Small Gods) > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > This electronic mail (including any attachments) may contain information that > is privileged, confidential, or otherwise protected from disclosure to anyone > other than its intended recipient(s). Any dissemination or use of this > electronic mail or its contents (including any attachments) by persons other > than the intended recipient(s) is strictly prohibited. If you have received > this message in error, please delete the original message in its entirety > (including any attachments) and notify us immediately by reply email so that > we may correct our internal records. Midland Paper Company accepts no > responsibility for any loss or damage from use of this electronic mail, > including any damage resulting from a computer virus. > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
