Lee I am using the vrf command.I have changed ny config to as below but still unable to ping across
ROUTER A CONFIGURATIONS interface Tunnel10 ip vrf forwarding SHAKE_MNGT ip address 172.16.2.1 255.255.255.252 keepalive 30 3 tunnel source GigabitEthernet0 tunnel destination D.D.D.D tunnel path-mtu-discovery tunnel vrf Mgmt-intf ROUTER B CONFIG interface Tunnel10 ip address 172.16.2.2 255.255.255.252 keepalive 30 3 tunnel source D.D.D.D tunnel destination X.X.X.X tunnel path-mtu-discovery ! I cant seem to be able to ping the point to point IP's Regards, Righa Shake On Tue, Mar 1, 2011 at 5:49 PM, Lee Riemer <lrie...@bestline.net> wrote: > Are you specifying the vrf interface in your ping command? > > > > On 3/1/2011 8:02 AM, Righa Shake wrote: > >> I have created a tunnel whose tunnel source is a public IP on a VRF >> instance.However i cant seems t ping on the point to point from my router. >> Am trying to have two different routes to the same router via different >> paths >> >> My settings are as follows: >> >> >> interface Tunnel10 >> ip address 172.16.2.1 255.255.255.252 >> keepalive 30 3 >> tunnel source Z.Z.Z.Z >> tunnel destination Y.Y.Y.Y >> tunnel vrf Mgmt-intf >> end >> >> ROUTERA# >> >> >> interface Tunnel10 >> ip address 172.16.2.2 255.255.255.252 >> keepalive 30 3 >> tunnel source Y.Y.Y.Y >> tunnel destination Z.Z.Z.Z >> end >> >> ROUTERB# >> >> From router to router i cant seem to ping across. >> An traffic doesnt seem to pass through this link. >> >> Any assistance is highly appreciated. >> >> Regards, >> Righa Shake >> _______________________________________________ >> cisco-nsp mailing list cisco-nsp@puck.nether.net >> https://puck.nether.net/mailman/listinfo/cisco-nsp >> archive at http://puck.nether.net/pipermail/cisco-nsp/ >> > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
