I would think it's doable with Flexible NetFlow in SRE. Haven't tried, though.
-A -----Original Message----- From: [email protected] [mailto:cisco-nsp- [email protected]] On Behalf Of Mack McBride Sent: Tuesday, March 29, 2011 9:54 PM To: Matlock, Kenneth L; Jon Harald Bøvre; [email protected] Subject: Re: [c-nsp] netflow top-talkers This is also not available in 12.0(33)S5 or S8 on the 12k platform or 12.2(33)SRD1 on the 7600 platform. It is probably better to do this on a netflow capture box than on the supervisor since this is software intensive. Mack McBride Network Architect -----Original Message----- From: [email protected] [mailto:cisco-nsp- [email protected]] On Behalf Of Matlock, Kenneth L Sent: Tuesday, March 29, 2011 1:36 PM To: Jon Harald Bøvre; [email protected] Subject: Re: [c-nsp] netflow top-talkers Works just fine on a 6506 Sup720-3B, on SXI5. Ken Matlock Network Analyst Exempla Healthcare (303) 467-4671 [email protected] -----Original Message----- From: [email protected] [mailto:cisco-nsp- [email protected]] On Behalf Of Jon Harald Bøvre Sent: Tuesday, March 29, 2011 12:17 PM To: [email protected] Subject: Re: [c-nsp] netflow top-talkers Hi Same result on our 7609's at SRE3. From command reference: http://www.cisco.com/en/US/docs/ios/netflow/command/reference/nf_01.html#wp1 014717 ip flow-top-talkers To configure NetFlow top talkers to capture traffic statistics for the unaggregated top flows of the heaviest traffic patterns and most-used applications in the network, use the ip flow-top-talkers command in global configuration mode. To disable NetFlow top talkers, use the no form of this command. ip flow-top-talkers no ip flow-top-talkers Tip The ip flow-top-talkers command does not appear in the configuration until you have configured the top number and sort-by [bytes | packets] commands. Router(config)# ip flow-top-talkers Router(config-flow-top-talkers)# top 4 Router(config-flow-top-talkers)# sort-by bytes When I try to configure: 520-060(config)#ip flow-top-talkers ^ % Invalid input detected at '^' marker. Assume this to be a bug Jon h Bøvre On 29.03.2011 19:53, Alexey wrote: > Hi, > > I have updated Cisco IOS c7600rsp72043_rp-ADVENTERPRISEK9-M from version > 122-33.SRB4 to 122-33.SRE3 on my Cisco 7600. > Аfter update I can't find command RR(config)#ip flow top-talkers, but in > the enable mode I can see that: > RR#show ip flow top-talkers > % Top talkers not configured > > Is this image supports netflow top-talkers? > > Thank you for answers. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
