+1. i fought in vain for this as well. there's no way that i know of to see if the limiters are being hit, other than some likely hidden command. would love to know if someone has it!
On Thu, Mar 31, 2011 at 10:35 AM, Jeff Fitzwater <jf...@princeton.edu> wrote: > Is there a way to log MLS RATE-LIMITs? > > > I have enabled "mls rate-limit multicast ipv4 pim" due to a downstream host > on a PIM enabled vlan, sending hundreds of PIM joins per second and spiking > CPU. The MLS rate limit worked, but would like to know when the limit is > hit, but I see no way to enable logging for MLS RATE LIMITERS. > > > Any ideas? > > > > Jeff Fitzwater > OIT Network Systems > Princeton University > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
