Hi all,
I'm in the process of planning an new edge router, and I'm currently looking at the Cisco 2811.. We need to have 2 x HWIC-1GE-SPF, 2 x WIC-1ADSL, and 2 x WIC-2T in the router. Looking at the datasheet of the 2811, it states that 4 slots are on board, capable of HWIC, WIC, VIC, or VWIC type modules - with an additional bank for an additional network module. The HWIC-1GE-SFP Datasheet (http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_shee t0900aecd8016be8d_ps5949_Products_Data_Sheet.html) indicates that only 1 of these modules would be supported on the 2811? Now, I realise that max throughput on the 2811 with two of these line cards will obviously be a huge bottleneck, but we will be nowhere near 100mbit/s throughput on these interfaces. My main goal in using this interface on the 2811 would be to terminate long range fiber on through an SFP interface. Given the low throughput on these WICs (Active/Passive failover), would I be able to install two of them into the 2811, or do I need to look at an alternative router? -- Chris. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/