Yes, I tried to pull out the cards and reinsert, replace. Unfortunately, no luck.
From: Mohammad Khalil [mailto:eng_m...@hotmail.com] Sent: Wednesday, May 25, 2011 3:15 PM To: r...@swift-online.com Subject: RE: [c-nsp] Cisco IGX Man did u try to pull out the cards and insert again ? did u try to swap ? do u have free slots ? > From: r...@swift-online.com > To: cisco-nsp@puck.nether.net > Date: Wed, 25 May 2011 02:31:38 +0530 > Subject: [c-nsp] Cisco IGX > > Hi, > > > > I have been using a cisco IGX 8430 since last 6 years. > > > > Recently the trunk line on a NTM card went down and thereafter whatever I > did, it would not come back up. In the end I thought that a reboot might fix > the problem, but once rebooted, it now does not recognize any of the other > cards as well. It keeps showing either the front cards or the back cards or > both are missing on all the slots except the NPM slots. > > > > Would appreciate if to know if anybody faced a similar problem and any > possible fix to this. > > > > Regards > > Ravi > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/