rancid is a good tool. It's also base on expect and perl so it's easy to modify the scripts to do other things. I installed this in a few other labs (non-certification) the biggest problem I ran into was everyone's tendency to blow away the routes,interface IP's and account info that alows RANCID to do it's work. Beyond that it's a great tool. Be careful where you run it. It's a pain to install on certain linux distros.
HTH, Keegan 2011/5/29 Saxon Jones <saxon.jo...@gmail.com> > It seems like a good idea to me. I do this manually when building test > labs and it works quite well. Doing a config replace http from a > cvsweb instance should let you "revert" to a previous config quite > easily, though we use https and authentication so I never bothered to > try that part myself. > > -saxon > > On 27 May 2011 16:10, Rogelio <scubac...@gmail.com> wrote: > > I would like to make a public CCIE lab for friends and have it reset > > all the configs at pre-set times. > > > > Is a tool like RANCID a good way to do this? I know that it can log > > in and do commands at preset times, and I thought that it's DB > > snapshots might be helpful as well. > > > > -- > > Also on LinkedIn? Feel free to connect if you too are an open > > networker: scubac...@gmail.com > > > > _______________________________________________ > > cisco-nsp mailing list cisco-nsp@puck.nether.net > > https://puck.nether.net/mailman/listinfo/cisco-nsp > > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/