Hi i am facing the same issue with Cisco ME3750 and the traffic i want to limit is the outbound traffic
> Date: Sun, 29 May 2011 23:34:20 +0200 > From: [email protected] > To: [email protected] > CC: [email protected] > Subject: Re: [c-nsp] Catalyst 6524 rate limit per port/vlan > > Hi Mark, > > thank you for your suggestion. I still can't figure out whats so > specific and difficult about egress rate limit? > Everyone seams to offer ingress rate limit but egress is very rare and > results vary. > > > Maybe someone from Cisco can shed a little light on this? :) > > > On Wed, May 25, 2011 at 3:48 AM, Mark Tinka <[email protected]> wrote: > > On Saturday, May 21, 2011 05:32:24 AM Pavel Dimow wrote: > > > >> I'am thinking of using CAT6524 as access switches for our > >> pure l2vpn customers. I have started reading about rate > >> limiting capabilities of those switches but it I can't > >> find a way to do a per port or per vlan rate limit. With > >> MQC I can limit the speed in inbound but not in outbound > >> direction. Is there any better way to do it? I don't > >> understand what is the problem with > >> outbound rate limit for Cisco (and Juniper) switches? Is > >> it architecture or something else and how come that > >> there is no problem for rate limit on routers (even the > >> smallest one). > > > > I would look at Cisco's ME3600X/3800X for this deployment. I > > wouldn't waste my time on an ME6524, given the capabilities > > and price of the ME3600X/3800X. > > > > Note that egress policing in this platform is not yet > > available in the software (but the hardware is built to > > support it). This should be out towards the end of 2011. > > > > Cheers, > > > > Mark. > > > _______________________________________________ > cisco-nsp mailing list [email protected] > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
