Do not use 5.0.2 check following. http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/deferral/Deferral_Notice_N7K_502.html
You can shut down the Fex portchannel interfaces on the switch upgrade the code on switch. This way you can save some traffic disruption. Krunal On Tue, Jun 7, 2011 at 10:19 AM, Arne Larsen / Region Nordjylland < a...@rn.dk> wrote: > Hi all > > When upgrading a Nexus5K setup with dual homed extenders, is it possible to > control the reboot of the extender. > If I put the installation into pending mode, and upgrade one of the 5K's, > can I then reboot them one by one. > We are going from 4.1.3 to 5.0.2 > > > /Arne > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/