This is the workaround when you can't put the address on the BVI, which you can't in some cases.
Mike On 6/22/11 1:24 AM, "Juergen Marenda" <j...@ilk.net> wrote: > >Sorry, >but I do not see the difference beetween IPv4 and IPv6 Behaviour here. > >As far as i remember you put the LAN-Interface vlan1 >and the radio-(sub-)interface into the same bridge-group >and configure the IPv4 (or Ipv6) on the bvi interface >to emulate the "normal" behaviour of home-customer-CPE's. > >Juergen. > _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/