No, boot system does not copy to flash, it loads file to RAM amd starts it. > -----Original Message----- > From: cisco-nsp-boun...@puck.nether.net > [mailto:cisco-nsp-boun...@puck.nether.net] On Behalf Of Peter Rathlev > Sent: Friday, June 24, 2011 10:41 PM > To: Scott Voll > Cc: cisco-nsp@puck.nether.net > Subject: Re: [c-nsp] Boot from TFTP > > On Fri, 2011-06-24 at 13:23 -0700, Scott Voll wrote: > > %SYS-3-IMAGE_TOO_BIG: 'tftp:// > > 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin' is too > large for > > available memory (51691544 bytes). > > %SYS-6-READ_BOOTFILE_FAIL: tftp:// > > 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin File read failed > > -- Not enough space. > > > > > > Config looks like this: boot system tftp:// > > 10.14.1.108/c2800nm-advipservicesk9-mz.151-3.T1.bin > > > > Memory needed is 512mb I have "Cisco 2821 (revision 53.50) with > > 776192K/10240K bytes of memory." so I should have enough ram. > > I'm guessing it's the flash. You probably have 51691544 bytes left on > the flash device. The image is 64562864 bytes. > > -- > Peter > > > > _______________________________________________ > cisco-nsp mailing list cisco-nsp@puck.nether.net > https://puck.nether.net/mailman/listinfo/cisco-nsp > archive at http://puck.nether.net/pipermail/cisco-nsp/ >
_______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/