Hi everybody, a customer connected with a 7204VXR (NPE-225), PA-E3 has bandwith-problems. The maximum outgoing TCP-throughput amounts only 15Mbit/s instead of 34Mbit/s (measured with iperf from the customer-side:
[ 5] 0.0-10.0 sec 17.4 MBytes 14.6 Mbits/sec Incoming bandwith is ok: [ 4] 0.0-10.1 sec 39.1 MBytes 32.3 Mbits/sec There are no rate-limits configured, there are no errors on the interfaces itself, the 7204VXR is pretty underutilized - so everything seems fine from that point of view. Any Ideas? Regards, Werner _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/