Hi all, I got a 7606-S with 72033-advipservicesk9_wan-mz.122-18.SXF17a.bin running the following modules:
================================ #show module Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC XXXXXXXXXXX 3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX XXXXXXXXXXX 6 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL XXXXXXXXXXX Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 000d.ed23.9028 to 000d.ed23.9037 1.7 12.2(18r)S1 12.2(18)SXF1 Ok 3 0013.7fcb.47c8 to 0013.7fcb.47f7 2.3 12.2(14r)S5 12.2(18)SXF1 Ok 6 0013.c43a.ff00 to 0013.c43a.ff03 5.3 8.4(2) 12.2(18)SXF1 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Distributed Forwarding Card WS-F6K-DFC3A XXXXXXXXXXX 2.6 Ok 3 Centralized Forwarding Card WS-F6700-CFC XXXXXXXXXXX 4.1 Ok 6 Policy Feature Card 3 WS-F6K-PFC3BXL XXXXXXXXXXX 1.8 Ok 6 MSFC3 Daughterboard WS-SUP720 XXXXXXXXXXX 2.6 Ok Mod Online Diag Status ---- ------------------- 1 Pass 3 Pass 6 Pass ================================ When I upgraded the IOS to c7600s72033-advipservicesk9-mz.150-1.S4.bin the WS-X6816-GBIC module in slot 1 does not come up. See bellow ================================ cr-tc2-ams#show module Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 16 Pure SFM-mode 16 port 1000mb GBIC WS-X6816-GBIC XXXXXXXXXXX 3 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX XXXXXXXXXXX 6 2 Supervisor Engine 720 (Active) WS-SUP720-3BXL XXXXXXXXXXX Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 000d.ed23.9028 to 000d.ed23.9037 1.7 Unknown Unknown PwrDown 3 0013.7fcb.47c8 to 0013.7fcb.47f7 2.3 12.2(14r)S5 15.0(1)S4 Ok 6 0013.c43a.ff00 to 0013.c43a.ff03 5.3 8.4(2) 15.0(1)S4 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Distributed Forwarding Card WS-F6K-DFC3A XXXXXXXXXXX 2.6 PwrDown 3 Centralized Forwarding Card WS-F6700-CFC XXXXXXXXXXX 4.1 Ok 6 Policy Feature Card 3 WS-F6K-PFC3BXL XXXXXXXXXXX 1.8 Ok 6 MSFC3 Daughterboard WS-SUP720 XXXXXXXXXXX 2.6 Ok Mod Online Diag Status ---- ------------------- 1 Not Applicable 3 Pass 6 Pass router(config)#power enable module 1 router(config)# 21:30:55: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 1, power not allowed: Unknown Feature Card. ================================ Also when booting IOS 15 I see a problem with the WS-X6748-GE-TX in slot 3: 00:03:40: SP: PREDNLD: LC doesn't meet resource requirement for pre-download, not reserving memory for slot 3 But that module will still work after the router has booted. Can somebody point me in the right direction to solve this problem so I can run the IOS 15 image? Thanks _______________________________________________ cisco-nsp mailing list [email protected] https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
