Hi all, I am looking for a thoughts about a BGP edge router upgrade.
I am planning to upgrade our BGP edge from a Cisco 7200/NPE-G1. The NPE-G1 suits our needs at the moment, but as we are looking to interconnect with more services, do more localpeerings and implement IPv6 in near future this might a good timing to upgrade. As we are running a few 6500s in our network already I was thinking to install a 6500 with SUP720-3BXL and a 6724-SFP linecard to replace our existing 7200 platform. The 3BXL will keep-up with full BGP feed and the platform can easily be upgraded to 10 gbit/s with a new line card (in example 6704-10GE). I know others are using the 6500/SUP720-3BXL for this purpose, but as the 6500 is designed a switch platform i would like hear others opinion on the subject? Maybe I should be looking to other platforms as well, like Huawei or Juniper? Rgrds Lars Eidsheim ________________________________ This email has been scanned and secured by Intellit This communication is for use by the intended recipient and contains information that may be privileged, confidential and exempt from disclosure or copyrighted under applicable law. If you are not the intended recipient, you are hereby formally notified that any dissemination, use, copying or distribution of this e-mail, in whole or in part, is strictly prohibited. Please notify the sender by return e-mail and delete this e-mail from your system. _______________________________________________ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
